How To Light A Gas Grill For The First Time

Hold it up to the burner and press to light. The grates will change in appearance.

Gas Charcoal Grill Combo Propane 2Burner Portable Set

First thing is to turn everything off, meaning the tank and all the burners.

How to light a gas grill for the first time. Wait 20 seconds after you hear ignition and see ignition. Don't wait and let it build up gas. Next, slowly open the valve on your propane tank (or natural gas line) all the way and wait a minute for the gas to travel through the gas line.

To see if your burners are getting gas, you can light them manually. This product is available in many retail stores. Test your gas grill for leaks on a regular basis, especially when its been unused for a while.

Next, turn on one of the gas burners on the grill. Open the grill before you ignite it. Then turn on the burner you want to light.

Light your charcoal or crank up your gas. To do it, get a long match or lighter and put the flame near your burner with the gas on. Second, turn on the gas at the propane tank.

Before using a propane or natural gas grill for the first time each season, perform a leak test. Then turn on the burners, setting them all to high. To light a weber gas grill, first open the lid so unlit gas fumes dont collect in the cooking box.

Turn on the gas burner closest to the. Press and turn one of the burner knobs and press the igniter button at the same time to start the grill. Turn on the gas again and use a manual barbecue lighter to light the grill burner.

After it is lit then open the other burners. Leak tests ensure the connection to the propane tank or natural gas line is safe and that the hose is in good. Repeat steps 3 and 4 when lighting.

Then hold your hand about 6 inches over the grill and leave it there until you feel heat. Once the first burner is lit you can easily light the other two or three burners and adjust their heat. Open the propane tank valve first.

The solution, novak said, is to keep the lid open before you light the grill: Shiny stainless steel will discolor and darken, and cast iron will take on a slick black sheen. Press the igniter button to start a flame.

Then, press the auto light or ignition button if your grill has one. If it doesn't light, and there are holes in the bottom of your unit, then you can stick a match near the burner from that position. If you're lighting the grill manually, hold the flame close to the burner with the gas flow.

Turn on all burners by adjusting the control knobs on the front of the grill, setting the burners to high heat. Check it from time to time: With the barbecue control knobs turned off, turn the propane cylinder or natural gas valve to the.

First, raise the lid of your gas grill. Click the igniter and keep clicking it until you hear and see ignition. Once you see that, place a match in the curled end of the holder.

If your burners light, then its the ignition switch or the wiring. If the igniter doesn't work, turn off the gas and wait a few minutes for the air to clear. You want your grill screaming hot.

The grill wont light when its dead. This seems to be the most common problem my friends have had with gas grills. Turn it and light it right away.

Never try to light the grill with the cover closed. How to light a gas grill safely. Behind most igniter buttons youll find an aa battery.

Open the lid of your grill and find the lighting hole on the side of the grill. Start the ignition source and turn the burner knob to the high position to light the first burner. Make sure you open the lid before you turn on the gas, please!

Rotisserie Prime Rib Roast Recipe Rib roast, Prime rib